Output
Terminal output of remote execution
Action: wanInfo at 5/14/2025, 10:27:59 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-05-14 12:19:18+02:00 DST
Logout Time : 2025-05-14 12:19:28+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont wan-info 0/0 4 9
---------------------------------------------------------------------
F/S/P : 0/0/4
ONT ID : 9
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.182
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : E813-6EBB-A0F0
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: wanInfo at 5/14/2025, 10:27:59 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-05-14 12:19:18+02:00 DST
Logout Time : 2025-05-14 12:19:28+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont wan-info 0/0 4 9
---------------------------------------------------------------------
F/S/P : 0/0/4
ONT ID : 9
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.182
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : E813-6EBB-A0F0
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0