Terminal output of remote execution
Action: unprovision at 7/1/2025, 1:18:20 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 25-06-2025 15:10:57+02:00 DST
Logout Time : 25-06-2025 15:11:01+02:00 DST
-----------------------------------------------------------------------------

OLTRibera_Ebre>undo interactive
Interactive function is disabled

OLTRibera_Ebre>enable

OLTRibera_Ebre#config

OLTRibera_Ebre(config)#undo service-port port 0/6/0 ont 1
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/6/0 ont 1
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTRibera_Ebre(config)#interface gpon 0/6

OLTRibera_Ebre(config-if-gpon-0/6)#ont delete 0 1
Number of ONTs that can be deleted: 1, success: 1

OLTRibera_Ebre(config-if-gpon-0/6)#quit

OLTRibera_Ebre(config)#quit

OLTRibera_Ebre#quit

Configuration console exit, please retry to log on

Terminal output of remote execution
Action: unprovision at 7/1/2025, 1:06:54 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2021. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 23/04/2025 11:16:10+01:00
Logout Time : 23/04/2025 11:16:15+01:00
-----------------------------------------------------------------------------

MA5800-X15-VALLS>undo interactive
Interactive function is disabled

MA5800-X15-VALLS>enable

MA5800-X15-VALLS#config

MA5800-X15-VALLS(config)#undo service-port port 0/4/8 ont 2
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/4/8 ont 2
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

MA5800-X15-VALLS(config)#interface gpon 0/4

MA5800-X15-VALLS(config-if-gpon-0/4)#ont delete 8 2
Number of ONTs that can be deleted: 1, success: 1

MA5800-X15-VALLS(config-if-gpon-0/4)#quit

MA5800-X15-VALLS(config)#quit

MA5800-X15-VALLS#quit

Configuration console exit, please retry to log on

Terminal output of remote execution
Action: unprovision at 6/30/2025, 9:35:36 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 11:02:09+02:00 DST
Logout Time : 2025-06-30 11:02:11+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/8 ont 3
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/8 ont 3
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 4
The number of total service virtual port which have been deleted: 4

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 8 3
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 9:02:08 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 11:01:56+02:00 DST
Logout Time : 2025-06-30 11:01:58+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 9:01:55 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 11:00:26+02:00 DST
Logout Time : 2025-06-30 11:00:28+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: reset at 6/30/2025, 9:00:25 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:59:41+02:00 DST
Logout Time : 2025-06-30 10:59:43+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont reset 8 3

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 8:59:08 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:58:44+02:00 DST
Logout Time : 2025-06-30 10:58:46+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 8:58:43 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:54:07+02:00 DST
Logout Time : 2025-06-30 10:54:20+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.