By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: wanInfo at 5/12/2024, 2:53:18 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:52:55+02:00 DST
Logout Time : 2024-05-12 16:52:56+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/1 1 0
---------------------------------------------------------------------
F/S/P : 0/1/1
ONT ID : 0
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.17
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 8840-3342-D64C
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 2
Name : 2_INTERNET_R_VID_126
Service type : Internet
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 100.64.99.247
Subnet mask : 255.255.255.0
Default gateway : 100.64.99.1
Manage VLAN : 126
Manage priority : 4
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64D
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Enable
Prefix : -
Prefix access mode : PrefixDelegation
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Disconnected
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : None
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 3
Name : 3_VOIP_R_VID_1000
Service type : Voip
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 1000
Manage priority : 7
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64E
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 5/12/2024, 2:52:54 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:52:07+02:00 DST
Logout Time : 2024-05-12 16:52:09+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>enable

OLTErro#config

OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:

Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
456 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
481 206 QinQ gpon 0/1 /1 0 2 vlan other-all 11 11 up
482 206 QinQ gpon 0/1 /1 0 3 vlan other-all 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used

OLTErro(config)#

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: serialInfo at 5/12/2024, 2:52:06 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:51:31+02:00 DST
Logout Time : 2024-05-12 16:51:33+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438955EEA5
-----------------------------------------------------------------------------
F/S/P : 0/1/1
ONT-ID : 0
Control flag : active
Run state : online
Config state : normal
Match state : match
DBA type : SR
ONT distance(m) : 1
ONT last distance(m) : -
ONT battery state : not support
Memory occupation : 44%
CPU occupation : 1%
Temperature : 50(C)
Authentic type : SN-auth
SN : 485754438955EEA5 (HWTC-8955EEA5)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : 10.3.106.17/23
Description : Test SAKANA
Last down cause : -
Last up time : 2024-05-12 16:49:29+02:00 DST
Last down time : -
Last dying gasp time : -
ONT online duration : 0 day(s), 0 hour(s), 2 minute(s), 40 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 11
Line profile name : guifi-qinq-full
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:30
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 103 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:20
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 1000 - - - - - -
--------------------------------------------------------------------
<T-CONT 3> DBA Profile-ID:10
<Gem Index 3>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 126 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 15
Service profile name : EG8M8145X6
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS adaptive 32
ETH adaptive 8
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
ETH 5 unconcern unconcern unconcern unconcern
ETH 6 unconcern unconcern unconcern unconcern
ETH 7 unconcern unconcern unconcern unconcern
ETH 8 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
ETH 5 operation discard
ETH 6 operation discard
ETH 7 operation discard
ETH 8 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
ETH 5 0
ETH 6 0
ETH 7 0
ETH 8 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
ETH 5 - - - Unlimited
ETH 6 - - - Unlimited
ETH 7 - - - Unlimited
ETH 8 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
TR069 server profile ID : 11
TR069 server profile name : ACS-NOC
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: wanInfo at 5/12/2024, 2:51:30 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:50:49+02:00 DST
Logout Time : 2024-05-12 16:50:50+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/1 1 18
Failure: The ONT does not exist

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: serialInfo at 5/12/2024, 2:51:07 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.9
Login Time : 12-05-2024 00:18:29+02:00 DST
Logout Time : 12-05-2024 00:18:30+02:00 DST
-----------------------------------------------------------------------------

OLTRibera_Ebre>scroll 512

OLTRibera_Ebre>undo interactive
Interactive function is disabled

OLTRibera_Ebre>undo smart
Interactive function is disabled

OLTRibera_Ebre>enable

OLTRibera_Ebre#config

OLTRibera_Ebre(config)#display ont info by-sn 485754430D8CF7AE
-----------------------------------------------------------------------------
F/S/P : 0/6/2
ONT-ID : 18
Control flag : active
Run state : online
Config state : normal
Match state : mismatch
DBA type : SR
ONT distance(m) : 286
ONT last distance(m) : 286
ONT battery state : not support
Memory occupation : 47%
CPU occupation : 1%
Temperature : 59(C)
Authentic type : SN-auth
SN : 485754430D8CF7AE (HWTC-0D8CF7AE)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : 10.2.65.102/19
Description : devId&#x2F;8380 dropId&#x2F;
11964
Last down cause : dying-gasp
Last up time : 07-05-2024 11:53:35+02:00 DST
Last down time : 07-05-2024 11:52:40+02:00 DST
Last dying gasp time : 07-05-2024 11:52:40+02:00 DST
ONT online duration : 5 day(s), 4 hour(s), 56 minute(s), 59 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
VS-ID : 0
VS name : admin-vs
Global ONT-ID : 18
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 14
Line profile name : puntacces-qinq-full
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:30
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 103 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:20
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 10 - - - - - -
--------------------------------------------------------------------
<T-CONT 3> DBA Profile-ID:10
<Gem Index 3>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 20 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 1
Service profile name : EG8M8145X6
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS 1 -
ETH 4 -
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 1 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
TR069 server profile ID : 10
TR069 server profile name : ACS-GRETA
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------

OLTRibera_Ebre(config)#quit

OLTRibera_Ebre#quit

Configuration console exit, please retry to log on
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 5/12/2024, 2:50:48 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:50:14+02:00 DST
Logout Time : 2024-05-12 16:50:16+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>enable

OLTErro#config

OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:

Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
456 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
481 206 QinQ gpon 0/1 /1 0 2 vlan other-all 11 11 up
482 206 QinQ gpon 0/1 /1 0 3 vlan other-all 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used

OLTErro(config)#

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 5/12/2024, 2:50:14 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:49:26+02:00 DST
Logout Time : 2024-05-12 16:49:35+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>enable

OLTErro#config

OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:

Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
456 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
481 206 QinQ gpon 0/1 /1 0 2 vlan other-all 11 11 up
482 206 QinQ gpon 0/1 /1 0 3 vlan other-all 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used

OLTErro(config)#

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:48:58+02:00 DST
Logout Time : 2024-05-12 16:49:01+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/1

OLTErro(config-if-gpon-0/1)#ont add 1 sn-auth 485754438955EEA5 omci ont-lineprile-id 11 ont-srvprofile-name EG8M8145X6 desc "TesSAKANA"
Number of ONTs that can be added: 1, success: 1
PortID :1, ONTID :0

OLTErro(config-if-gpon-0/1)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:49:23+02:00 DST
Logout Time : 2024-05-12 16:49:25+02:00 DST
-----------------------------------------------------------------------------

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/1

OLTErro(config-if-gpon-0/1)#ont ipconfig 1 0 dhcp vlan 103 priority 6

OLTErro(config-if-gpon-0/1)#ont tr069-server-config 1 0 profile-id 11

OLTErro(config-if-gpon-0/1)#quit

OLTErro(config)#undo interactive
Interactive function is disabled

OLTErro(config)#service-port vlan 103 gpon 0/1/1 ont 0 gemport 1 multi-service er-vlan 103 tag-transform translate inbound traffic-table index 10 outbound trfic-table index 10

OLTErro(config)#service-port vlan 206 gpon 0/1/1 ont 0 gemport 2 multi-service er-vlan other-all tag-transform default inbound traffic-table index 11 outboun traffic-table index 11

OLTErro(config)#service-port vlan 206 gpon 0/1/1 ont 0 gemport 3 multi-service er-vlan other-all tag-transform default inbound traffic-table index 1000 outbod traffic-table index 1000

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
send: spawn id exp3 not open
while executing
"send "$cmd\r""
("foreach" body line 2)
invoked from within
"foreach cmd $commands {
send "$cmd\r"
expect -re {[>#:?]$}
}"
(file "/var/www/html/net9/int/OntManagment/huaweima-tlnt.sh" line 37)
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: unprovision at 5/12/2024, 2:48:58 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-12 16:48:34+02:00 DST
Logout Time : 2024-05-12 16:48:37+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/1/1 ont 0
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/1/1 ont 0
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 5%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTErro(config)#interface gpon 0/1

OLTErro(config-if-gpon-0/1)#ont delete 1 0
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/1)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 12 May, 2024
Output
Terminal output of remote execution
Action: serialInfo at 5/12/2024, 2:48:34 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.9
Login Time : 2024-05-12 09:27:52+02:00 DST
Logout Time : 2024-05-12 09:27:54+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438955EEA5
-----------------------------------------------------------------------------
F/S/P : 0/1/1
ONT-ID : 0
Control flag : active
Run state : online
Config state : normal
Match state : match
DBA type : SR
ONT distance(m) : 1
ONT last distance(m) : -
ONT battery state : not support
Memory occupation : 44%
CPU occupation : 13%
Temperature : 51(C)
Authentic type : SN-auth
SN : 485754438955EEA5 (HWTC-8955EEA5)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : 10.3.106.17/23
Description : Test SAKANA
Last down cause : -
Last up time : 2024-05-10 22:54:30+02:00 DST
Last down time : -
Last dying gasp time : -
ONT online duration : 1 day(s), 17 hour(s), 54 minute(s), 6 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 11
Line profile name : guifi-qinq-full
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:30
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 103 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:20
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 1000 - - - - - -
--------------------------------------------------------------------
<T-CONT 3> DBA Profile-ID:10
<Gem Index 3>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 126 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 15
Service profile name : EG8M8145X6
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS adaptive 32
ETH adaptive 8
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
ETH 5 unconcern unconcern unconcern unconcern
ETH 6 unconcern unconcern unconcern unconcern
ETH 7 unconcern unconcern unconcern unconcern
ETH 8 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
ETH 5 operation discard
ETH 6 operation discard
ETH 7 operation discard
ETH 8 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
ETH 5 0
ETH 6 0
ETH 7 0
ETH 8 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
ETH 5 - - - Unlimited
ETH 6 - - - Unlimited
ETH 7 - - - Unlimited
ETH 8 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
TR069 server profile ID : 11
TR069 server profile name : ACS-NOC
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0