Terminal output of remote execution
Action: wanInfo at 6/30/2025, 9:02:08 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 11:01:56+02:00 DST
Logout Time : 2025-06-30 11:01:58+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 9:01:55 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 11:00:26+02:00 DST
Logout Time : 2025-06-30 11:00:28+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: reset at 6/30/2025, 9:00:25 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:59:41+02:00 DST
Logout Time : 2025-06-30 10:59:43+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont reset 8 3

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 8:59:08 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:58:44+02:00 DST
Logout Time : 2025-06-30 10:58:46+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: wanInfo at 6/30/2025, 8:58:43 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:54:07+02:00 DST
Logout Time : 2025-06-30 10:54:20+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 8 3
---------------------------------------------------------------------
F/S/P : 0/0/8
ONT ID : 3
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.188
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : BC1E-8549-E085
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: unprovision at 6/30/2025, 8:47:10 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-06-30 10:43:29+02:00 DST
Logout Time : 2025-06-30 10:43:31+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/8 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/8 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 4
The number of total service virtual port which have been deleted: 4

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 8 6
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.

Terminal output of remote execution
Action: servicePortsInfo at 6/30/2025, 8:43:29 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-05-20 16:31:50+02:00 DST
Logout Time : 2025-05-20 16:31:52+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>enable

OLTErro#config

OLTErro(config)#display service-port port 0/0/8 ont 6
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:

Command:
display service-port port 0/0/8 ont 6
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
133 103 common gpon 0/0 /8 6 2 vlan 103 10 10 up
134 6 common gpon 0/0 /8 6 1 vlan 6 1000 1000 up
135 22 common gpon 0/0 /8 6 3 vlan 22 10 10 up
136 3 common gpon 0/0 /8 6 4 vlan 3 11 11 up
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used

OLTErro(config)#

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.