By carles.casanova, 18 September, 2024
By carles.casanova, 18 September, 2024
By admin.sisnet, 17 September, 2024
By admin.sisnet, 17 September, 2024
By isis.bonilla, 17 September, 2024
By isis.bonilla, 17 September, 2024
By isis.bonilla, 17 September, 2024
By webmestre, 17 September, 2024
Output
Terminal output of remote execution
Action: wanInfo at 9/17/2024, 10:00:00 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:59:46+02:00 DST
Logout Time : 2024-09-17 11:59:47+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont wan-info 0/1 1 0
---------------------------------------------------------------------
F/S/P : 0/1/1
ONT ID : 0
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.94
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 8840-3342-D64C
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 2
Name : 2_INTERNET_R_VID_126
Service type : Internet
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 126
Manage priority : 4
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64D
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Enable
Prefix : -
Prefix access mode : PrefixDelegation
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Disconnected
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : None
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 3
Name : 3_VOIP_R_VID_1000
Service type : Voip
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 1000
Manage priority : 7
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64E
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: wanInfo at 9/17/2024, 10:00:00 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:59:46+02:00 DST
Logout Time : 2024-09-17 11:59:47+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont wan-info 0/1 1 0
---------------------------------------------------------------------
F/S/P : 0/1/1
ONT ID : 0
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.94
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 8840-3342-D64C
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 2
Name : 2_INTERNET_R_VID_126
Service type : Internet
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 126
Manage priority : 4
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64D
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Enable
Prefix : -
Prefix access mode : PrefixDelegation
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Disconnected
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : None
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 3
Name : 3_VOIP_R_VID_1000
Service type : Voip
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 1000
Manage priority : 7
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64E
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 17 September, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 9/17/2024, 9:59:45 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:58:13+02:00 DST
Logout Time : 2024-09-17 11:58:21+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>enable
OLTErro#config
OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
523 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
524 4000 common gpon 0/1 /1 0 2 vlan 4000 11 11 up
543 60 common gpon 0/1 /1 0 3 vlan 60 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: servicePortsInfo at 9/17/2024, 9:59:45 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:58:13+02:00 DST
Logout Time : 2024-09-17 11:58:21+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>enable
OLTErro#config
OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
523 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
524 4000 common gpon 0/1 /1 0 2 vlan 4000 11 11 up
543 60 common gpon 0/1 /1 0 3 vlan 60 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0