By isis.bonilla, 17 September, 2024
By isis.bonilla, 17 September, 2024
By isis.bonilla, 17 September, 2024
By webmestre, 17 September, 2024
Output
Terminal output of remote execution
Action: wanInfo at 9/17/2024, 10:00:00 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:59:46+02:00 DST
Logout Time : 2024-09-17 11:59:47+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont wan-info 0/1 1 0
---------------------------------------------------------------------
F/S/P : 0/1/1
ONT ID : 0
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.94
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 8840-3342-D64C
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 2
Name : 2_INTERNET_R_VID_126
Service type : Internet
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 126
Manage priority : 4
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64D
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Enable
Prefix : -
Prefix access mode : PrefixDelegation
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Disconnected
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : None
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 3
Name : 3_VOIP_R_VID_1000
Service type : Voip
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 1000
Manage priority : 7
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64E
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: wanInfo at 9/17/2024, 10:00:00 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:59:46+02:00 DST
Logout Time : 2024-09-17 11:59:47+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont wan-info 0/1 1 0
---------------------------------------------------------------------
F/S/P : 0/1/1
ONT ID : 0
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.94
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 8840-3342-D64C
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 2
Name : 2_INTERNET_R_VID_126
Service type : Internet
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 126
Manage priority : 4
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64D
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Enable
Prefix : -
Prefix access mode : PrefixDelegation
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Disconnected
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : None
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 3
Name : 3_VOIP_R_VID_1000
Service type : Voip
Connection type : IP routed
IPv4 Connection status : Connecting
IPv4 access type : DHCP
IPv4 address : -
Subnet mask : -
Default gateway : -
Manage VLAN : 1000
Manage priority : 7
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8840-3342-D64E
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By webmestre, 17 September, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 9/17/2024, 9:59:45 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:58:13+02:00 DST
Logout Time : 2024-09-17 11:58:21+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>enable
OLTErro#config
OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
523 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
524 4000 common gpon 0/1 /1 0 2 vlan 4000 11 11 up
543 60 common gpon 0/1 /1 0 3 vlan 60 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: servicePortsInfo at 9/17/2024, 9:59:45 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-17 11:58:13+02:00 DST
Logout Time : 2024-09-17 11:58:21+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>enable
OLTErro#config
OLTErro(config)#display service-port port 0/1/1 ont 0
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/1/1 ont 0
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
523 103 common gpon 0/1 /1 0 1 vlan 103 10 10 up
524 4000 common gpon 0/1 /1 0 2 vlan 4000 11 11 up
543 60 common gpon 0/1 /1 0 3 vlan 60 1000 1000 up
-----------------------------------------------------------------------------
Total : 3 (Up/Down : 3/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By admin.sisnet, 13 September, 2024
By andrey.yurashkevych, 13 September, 2024
Output
Terminal output of remote execution
Action: serialInfo at 9/13/2024, 10:50:48 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:49:31+02:00 DST
Logout Time : 2024-09-13 12:49:39+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo interactive
Interactive function is disabled
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont info by-sn 48575443A8A643A7
-----------------------------------------------------------------------------
F/S/P : 0/0/6
ONT-ID : 12
Control flag : active
Run state : online
Config state : normal
Match state : match
DBA type : SR
ONT distance(m) : 11478
ONT last distance(m) : -
ONT battery state : not support
Memory occupation : 18%
CPU occupation : 4%
Temperature : 56(C)
Authentic type : SN-auth
SN : 48575443A8A643A7 (HWTC-A8A643A7)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : 10.3.106.81/23
Description : devId-12650 dropId-12636
Last down cause : -
Last up time : 2024-09-13 12:49:33+02:00 DST
Last down time : -
Last dying gasp time : -
ONT online duration : 0 day(s), 0 hour(s), 1 minute(s), 17 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 24
Line profile name : wikai-full
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:30
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 103 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:20
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 4000 - - - - - -
--------------------------------------------------------------------
<T-CONT 3> DBA Profile-ID:10
<Gem Index 3>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 60 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 15
Service profile name : EG8M8145X6
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS adaptive 32
ETH adaptive 8
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
ETH 5 unconcern unconcern unconcern unconcern
ETH 6 unconcern unconcern unconcern unconcern
ETH 7 unconcern unconcern unconcern unconcern
ETH 8 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
ETH 5 operation discard
ETH 6 operation discard
ETH 7 operation discard
ETH 8 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
ETH 5 0
ETH 6 0
ETH 7 0
ETH 8 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
ETH 5 - - - Unlimited
ETH 6 - - - Unlimited
ETH 7 - - - Unlimited
ETH 8 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
TR069 server profile ID : 10
TR069 server profile name : ACS-ERRO
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: serialInfo at 9/13/2024, 10:50:48 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:49:31+02:00 DST
Logout Time : 2024-09-13 12:49:39+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>undo interactive
Interactive function is disabled
OLTErro>undo smart
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#display ont info by-sn 48575443A8A643A7
-----------------------------------------------------------------------------
F/S/P : 0/0/6
ONT-ID : 12
Control flag : active
Run state : online
Config state : normal
Match state : match
DBA type : SR
ONT distance(m) : 11478
ONT last distance(m) : -
ONT battery state : not support
Memory occupation : 18%
CPU occupation : 4%
Temperature : 56(C)
Authentic type : SN-auth
SN : 48575443A8A643A7 (HWTC-A8A643A7)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : 10.3.106.81/23
Description : devId-12650 dropId-12636
Last down cause : -
Last up time : 2024-09-13 12:49:33+02:00 DST
Last down time : -
Last dying gasp time : -
ONT online duration : 0 day(s), 0 hour(s), 1 minute(s), 17 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 24
Line profile name : wikai-full
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:30
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 103 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:20
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 4000 - - - - - -
--------------------------------------------------------------------
<T-CONT 3> DBA Profile-ID:10
<Gem Index 3>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 60 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 15
Service profile name : EG8M8145X6
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS adaptive 32
ETH adaptive 8
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
ETH 5 unconcern unconcern unconcern unconcern
ETH 6 unconcern unconcern unconcern unconcern
ETH 7 unconcern unconcern unconcern unconcern
ETH 8 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
ETH 5 operation discard
ETH 6 operation discard
ETH 7 operation discard
ETH 8 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
ETH 5 0
ETH 6 0
ETH 7 0
ETH 8 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
ETH 5 - - - Unlimited
ETH 6 - - - Unlimited
ETH 7 - - - Unlimited
ETH 8 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
TR069 server profile ID : 10
TR069 server profile name : ACS-ERRO
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By andrey.yurashkevych, 13 September, 2024
Output
Terminal output of remote execution
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:49:07+02:00 DST
Logout Time : 2024-09-13 12:49:10+02:00 DST
-----------------------------------------------------------------------------
OLTErro>undo smart
Interactive function is disabled
OLTErro>undo interactive
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#interface gpon 0/0
OLTErro(config-if-gpon-0/0)#ont add 6 sn-auth 48575443A8A643A7 omci ont-lineprole-id 24 ont-srvprofile-name EG8M8145X6 desc "devId-1265dropId-12636"
Number of ONTs that can be added: 1, success: 1
PortID :6, ONTID :12
OLTErro(config-if-gpon-0/0)#quit
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:49:28+02:00 DST
Logout Time : 2024-09-13 12:49:30+02:00 DST
-----------------------------------------------------------------------------
OLTErro>enable
OLTErro#config
OLTErro(config)#interface gpon 0/0
OLTErro(config-if-gpon-0/0)#ont ipconfig 6 12 dhcp vlan 103 priority 6
OLTErro(config-if-gpon-0/0)#ont tr069-server-config 6 12 profile-id 10
OLTErro(config-if-gpon-0/0)#quit
OLTErro(config)#undo interactive
Interactive function is disabled
OLTErro(config)#service-port vlan 103 gpon 0/0/6 ont 12 gemport 1 multi-serviceser-vlan 103 tag-transform translate inbound traffic-table index 10 outbound tffic-table index 10
OLTErro(config)#service-port vlan 4000 gpon 0/0/6 ont 12 gemport 2 multi-servi user-vlan 4000 tag-transform translate inbound traffic-table index 11 outboundtraffic-table index 11
OLTErro(config)#service-port vlan 60 gpon 0/0/6 ont 12 gemport 3 multi-service er-vlan 60 tag-transform translate inbound traffic-table index 300 outbound trfic-table index 300
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:49:07+02:00 DST
Logout Time : 2024-09-13 12:49:10+02:00 DST
-----------------------------------------------------------------------------
OLTErro>undo smart
Interactive function is disabled
OLTErro>undo interactive
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#interface gpon 0/0
OLTErro(config-if-gpon-0/0)#ont add 6 sn-auth 48575443A8A643A7 omci ont-lineprole-id 24 ont-srvprofile-name EG8M8145X6 desc "devId-1265dropId-12636"
Number of ONTs that can be added: 1, success: 1
PortID :6, ONTID :12
OLTErro(config-if-gpon-0/0)#quit
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:49:28+02:00 DST
Logout Time : 2024-09-13 12:49:30+02:00 DST
-----------------------------------------------------------------------------
OLTErro>enable
OLTErro#config
OLTErro(config)#interface gpon 0/0
OLTErro(config-if-gpon-0/0)#ont ipconfig 6 12 dhcp vlan 103 priority 6
OLTErro(config-if-gpon-0/0)#ont tr069-server-config 6 12 profile-id 10
OLTErro(config-if-gpon-0/0)#quit
OLTErro(config)#undo interactive
Interactive function is disabled
OLTErro(config)#service-port vlan 103 gpon 0/0/6 ont 12 gemport 1 multi-serviceser-vlan 103 tag-transform translate inbound traffic-table index 10 outbound tffic-table index 10
OLTErro(config)#service-port vlan 4000 gpon 0/0/6 ont 12 gemport 2 multi-servi user-vlan 4000 tag-transform translate inbound traffic-table index 11 outboundtraffic-table index 11
OLTErro(config)#service-port vlan 60 gpon 0/0/6 ont 12 gemport 3 multi-service er-vlan 60 tag-transform translate inbound traffic-table index 300 outbound trfic-table index 300
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By andrey.yurashkevych, 13 September, 2024
Output
Terminal output of remote execution
Action: unprovision at 9/13/2024, 10:49:06 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:48:38+02:00 DST
Logout Time : 2024-09-13 12:48:40+02:00 DST
-----------------------------------------------------------------------------
OLTErro>undo interactive
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#undo service-port port 0/0/6 ont 12
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/0/6 ont 12
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3
OLTErro(config)#interface gpon 0/0
OLTErro(config-if-gpon-0/0)#ont delete 6 12
Number of ONTs that can be deleted: 1, success: 1
OLTErro(config-if-gpon-0/0)#quit
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: unprovision at 9/13/2024, 10:49:06 AM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-13 12:48:38+02:00 DST
Logout Time : 2024-09-13 12:48:40+02:00 DST
-----------------------------------------------------------------------------
OLTErro>undo interactive
Interactive function is disabled
OLTErro>enable
OLTErro#config
OLTErro(config)#undo service-port port 0/0/6 ont 12
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/0/6 ont 12
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3
OLTErro(config)#interface gpon 0/0
OLTErro(config-if-gpon-0/0)#ont delete 6 12
Number of ONTs that can be deleted: 1, success: 1
OLTErro(config-if-gpon-0/0)#quit
OLTErro(config)#quit
OLTErro#quit
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0