By carles.casanova, 24 September, 2024
By carles.casanova, 24 September, 2024
By carles.casanova, 24 September, 2024
By xabier.garmendia, 24 September, 2024
Output
Terminal output of remote execution
Action: unprovision at 9/24/2024, 10:39:29 AM
Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2024-09-24 11:33:04+02:00 DST
Logout Time : 2024-09-24 11:33:05+02:00 DST
-----------------------------------------------------------------------------
OLTZumaia>undo interactive
Interactive function is disabled
OLTZumaia>enable
OLTZumaia#config
OLTZumaia(config)#undo service-port port 0/2/14 ont 0
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/2/14 ont 0
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist
OLTZumaia(config)#interface gpon 0/2
OLTZumaia(config-if-gpon-0/2)#ont delete 14 0
Failure: The ONT does not exist
OLTZumaia(config-if-gpon-0/2)#quit
OLTZumaia(config)#quit
OLTZumaia#quit
Configuration console exit, please retry to log on
Action: unprovision at 9/24/2024, 10:39:29 AM
Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2024-09-24 11:33:04+02:00 DST
Logout Time : 2024-09-24 11:33:05+02:00 DST
-----------------------------------------------------------------------------
OLTZumaia>undo interactive
Interactive function is disabled
OLTZumaia>enable
OLTZumaia#config
OLTZumaia(config)#undo service-port port 0/2/14 ont 0
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/2/14 ont 0
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist
OLTZumaia(config)#interface gpon 0/2
OLTZumaia(config-if-gpon-0/2)#ont delete 14 0
Failure: The ONT does not exist
OLTZumaia(config-if-gpon-0/2)#quit
OLTZumaia(config)#quit
OLTZumaia#quit
Configuration console exit, please retry to log on
retCode
255
By xabier.garmendia, 24 September, 2024
Output
Terminal output of remote execution
Action: unprovision at 9/24/2024, 10:37:43 AM
Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2024-09-24 11:31:51+02:00 DST
Logout Time : 2024-09-24 11:31:53+02:00 DST
-----------------------------------------------------------------------------
OLTZumaia>undointeractive
Interactive function is disabled
OLTZumaia>enable
OLTZumaia#config
OLTZumaia(config)#undo service-port port 0/3/11 ont 2
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/3/11 ont 2
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist
OLTZumaia(config)#interface gpon 0/3
OLTZumaia(config-if-gpon-0/3)#ont delete 11 2
Failure: The ONT does not exist
OLTZumaia(config-if-gpon-0/3)#quit
OLTZumaia(config)#quit
OLTZumaia#quit
Configuration console exit, please retry to log on
Action: unprovision at 9/24/2024, 10:37:43 AM
Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2024-09-24 11:31:51+02:00 DST
Logout Time : 2024-09-24 11:31:53+02:00 DST
-----------------------------------------------------------------------------
OLTZumaia>undointeractive
Interactive function is disabled
OLTZumaia>enable
OLTZumaia#config
OLTZumaia(config)#undo service-port port 0/3/11 ont 2
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/3/11 ont 2
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist
OLTZumaia(config)#interface gpon 0/3
OLTZumaia(config-if-gpon-0/3)#ont delete 11 2
Failure: The ONT does not exist
OLTZumaia(config-if-gpon-0/3)#quit
OLTZumaia(config)#quit
OLTZumaia#quit
Configuration console exit, please retry to log on
retCode
255
By xabier.garmendia, 24 September, 2024
Output
Terminal output of remote execution
Action: unprovision at 9/24/2024, 10:36:31 AM
Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2024-09-20 11:21:53+02:00 DST
Logout Time : 2024-09-20 11:21:56+02:00 DST
-----------------------------------------------------------------------------
OLTZumaia>undo
OLTZumaia>undo interactive
Interactive function is disabled
OLTZumaia>enable
OLTZumaia#config
OLTZumaia(config)#undo service-port port 0/6/7 ont 0
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/6/7 ont 0
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3
OLTZumaia(config)#interface gpon 0/6
OLTZumaia(config-if-gpon-0/6)#ont delete 7 0
Number of ONTs that can be deleted: 1, success: 1
OLTZumaia(config-if-gpon-0/6)#quit
OLTZumaia(config)#quit
OLTZumaia#quit
Configuration console exit, please retry to log on
Action: unprovision at 9/24/2024, 10:36:31 AM
Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2024-09-20 11:21:53+02:00 DST
Logout Time : 2024-09-20 11:21:56+02:00 DST
-----------------------------------------------------------------------------
OLTZumaia>undo
OLTZumaia>undo interactive
Interactive function is disabled
OLTZumaia>enable
OLTZumaia#config
OLTZumaia(config)#undo service-port port 0/6/7 ont 0
{ <cr>|gemport<K> }:
Command:
undo service-port port 0/6/7 ont 0
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3
OLTZumaia(config)#interface gpon 0/6
OLTZumaia(config-if-gpon-0/6)#ont delete 7 0
Number of ONTs that can be deleted: 1, success: 1
OLTZumaia(config-if-gpon-0/6)#quit
OLTZumaia(config)#quit
OLTZumaia#quit
Configuration console exit, please retry to log on
retCode
255
By isis.bonilla, 23 September, 2024
By webmestre, 20 September, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 9/20/2024, 5:26:23 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
port
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name: 0/0/9network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-20 19:26:22+02:00 DST
Logout Time : --
-----------------------------------------------------------------------------
OLTErro> sconrotll 512
OLTErro>10
{en <cr>|e2e<K>ab|gemport<K>|sort-by<K>le }:
Command:
display service-port port 0/0/9 ont 10
Switch-Oriented Flow List
-----------------------------------------------------------------------------
OLTErro#
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
557 103 common gpon 0/0 /9 10 2 vlan 103 10 10 up
558 6 common gpon 0/0 /9 10 1 vlan 6 1000 1000 up
559 22 common gpon 0/0 /9 10 3 vlan 22 10 10 up
560 3 common gpon 0/0 /9 10 4 vlan 3 11 11 up co
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)nf
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,ig
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#disp
OLTErro(config)#qlauiyt
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]: seryv
OLTErro#ice-port
Configuration console exit, please retry to log on
Connection closed by foreign host.
port 0/0/9 ont 10
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/0/9 ont 10
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
557 103 common gpon 0/0 /9 10 2 vlan 103 10 10 up
558 6 common gpon 0/0 /9 10 1 vlan 6 1000 1000 up
559 22 common gpon 0/0 /9 10 3 vlan 22 10 10 up
560 3 common gpon 0/0 /9 10 4 vlan 3 11 11 up
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#
Action: servicePortsInfo at 9/20/2024, 5:26:23 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
port
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name: 0/0/9network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-20 19:26:22+02:00 DST
Logout Time : --
-----------------------------------------------------------------------------
OLTErro> sconrotll 512
OLTErro>10
{en <cr>|e2e<K>ab|gemport<K>|sort-by<K>le }:
Command:
display service-port port 0/0/9 ont 10
Switch-Oriented Flow List
-----------------------------------------------------------------------------
OLTErro#
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
557 103 common gpon 0/0 /9 10 2 vlan 103 10 10 up
558 6 common gpon 0/0 /9 10 1 vlan 6 1000 1000 up
559 22 common gpon 0/0 /9 10 3 vlan 22 10 10 up
560 3 common gpon 0/0 /9 10 4 vlan 3 11 11 up co
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)nf
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,ig
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#disp
OLTErro(config)#qlauiyt
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]: seryv
OLTErro#ice-port
Configuration console exit, please retry to log on
Connection closed by foreign host.
port 0/0/9 ont 10
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/0/9 ont 10
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
557 103 common gpon 0/0 /9 10 2 vlan 103 10 10 up
558 6 common gpon 0/0 /9 10 1 vlan 6 1000 1000 up
559 22 common gpon 0/0 /9 10 3 vlan 22 10 10 up
560 3 common gpon 0/0 /9 10 4 vlan 3 11 11 up
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#
retCode
0
By webmestre, 20 September, 2024
Output
Terminal output of remote execution
Action: servicePortsInfo at 9/20/2024, 5:26:23 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
port
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name: 0/0/9network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-20 19:26:22+02:00 DST
Logout Time : --
-----------------------------------------------------------------------------
OLTErro> sconrotll 512
OLTErro>10
{en <cr>|e2e<K>ab|gemport<K>|sort-by<K>le }:
Command:
display service-port port 0/0/9 ont 10
Switch-Oriented Flow List
-----------------------------------------------------------------------------
OLTErro#
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
557 103 common gpon 0/0 /9 10 2 vlan 103 10 10 up
558 6 common gpon 0/0 /9 10 1 vlan 6 1000 1000 up
559 22 common gpon 0/0 /9 10 3 vlan 22 10 10 up
560 3 common gpon 0/0 /9 10 4 vlan 3 11 11 up co
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)nf
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,ig
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#disp
OLTErro(config)#qlauiyt
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]: seryv
OLTErro#ice-port
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: servicePortsInfo at 9/20/2024, 5:26:23 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
port
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name: 0/0/9network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-20 19:26:22+02:00 DST
Logout Time : --
-----------------------------------------------------------------------------
OLTErro> sconrotll 512
OLTErro>10
{en <cr>|e2e<K>ab|gemport<K>|sort-by<K>le }:
Command:
display service-port port 0/0/9 ont 10
Switch-Oriented Flow List
-----------------------------------------------------------------------------
OLTErro#
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
557 103 common gpon 0/0 /9 10 2 vlan 103 10 10 up
558 6 common gpon 0/0 /9 10 1 vlan 6 1000 1000 up
559 22 common gpon 0/0 /9 10 3 vlan 22 10 10 up
560 3 common gpon 0/0 /9 10 4 vlan 3 11 11 up co
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)nf
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,ig
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#disp
OLTErro(config)#qlauiyt
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]: seryv
OLTErro#ice-port
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0