Output
Terminal output of remote execution
Action: servicePortsInfo at 9/12/2024, 3:07:54 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-03 19:57:51+02:00 DST
Logout Time : 2024-09-03 19:57:53+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>enable
OLTErro#config
OLTErro(config)#display service-port port 0/0/7 ont 3
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/0/7 ont 3
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
22560 103 common gpon 0/0 /7 3 2 vlan 103 10 10 up
22561 6 common gpon 0/0 /7 3 1 vlan 6 1000 1000 up
22562 22 common gpon 0/0 /7 3 3 vlan 22 10 10 up
22563 3 common gpon 0/0 /7 3 4 vlan 3 11 11 up
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
Action: servicePortsInfo at 9/12/2024, 3:07:54 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.
>>User name:network
>>User password:
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.
-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-09-03 19:57:51+02:00 DST
Logout Time : 2024-09-03 19:57:53+02:00 DST
-----------------------------------------------------------------------------
OLTErro>scroll 512
OLTErro>enable
OLTErro#config
OLTErro(config)#display service-port port 0/0/7 ont 3
{ <cr>|e2e<K>|gemport<K>|sort-by<K> }:
Command:
display service-port port 0/0/7 ont 3
Switch-Oriented Flow List
-----------------------------------------------------------------------------
INDEX VLAN VLAN PORT F/ S/ P VPI VCI FLOW FLOW RX TX STATE
ID ATTR TYPE TYPE PARA
-----------------------------------------------------------------------------
22560 103 common gpon 0/0 /7 3 2 vlan 103 10 10 up
22561 6 common gpon 0/0 /7 3 1 vlan 6 1000 1000 up
22562 22 common gpon 0/0 /7 3 3 vlan 22 10 10 up
22563 3 common gpon 0/0 /7 3 4 vlan 3 11 11 up
-----------------------------------------------------------------------------
Total : 4 (Up/Down : 4/0)
Note : F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pritag--priority-tagged,
ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe.
When FLOW TYPE is plist, the value of FLOW PARA is a byte in
hexadecimal format and indicates a priority list. Eight bits
of its binary value indicate priorities 0-7 from the least
significant bit to the most significant bit. Value 1 indicates
that the priority is used. For example, if FLOW PARA is 0x23 and
its binary format is 0010 0011, priorities 0, 1 and 5 are used
OLTErro(config)#
OLTErro(config)#quit
OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y
OLTErro#
Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0