By rroca, 19 May, 2024

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 5/19/2024, 3:21:01 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 17:18:32+02:00 DST
Logout Time : --
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438635139B
-----------------------------------------------------------------------------
F/S/P : 0/0/4
ONT-ID : 11
Control flag : active
Run state : offline
Config state : initial
Match state : initial
DBA type : -
ONT distance(m) : -
ONT last distance(m) : -
ONT battery state : -
Memory occupation : -
CPU occupation : -
Temperature : -
Authentic type : SN-auth
SN : 485754438635139B (HWTC-8635139B)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
Description : ONU/3956
Last down cause : -
Last up time : -
Last down time : -
Last dying gasp time : -
ONT online duration : -
Type C support : -
Interoperability-mode : Unknown
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 12
Line profile name : residential_eve
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:10
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
1 7 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:30
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
1 103 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 11
Service profile name : HG8245Q2
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS adaptive 32
ETH adaptive 8
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
ETH 5 unconcern unconcern unconcern unconcern
ETH 6 unconcern unconcern unconcern unconcern
ETH 7 unconcern unconcern unconcern unconcern
ETH 8 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
ETH 5 operation discard
ETH 6 operation discard
ETH 7 operation discard
ETH 8 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
ETH 5 0
ETH 6 0
ETH 7 0
ETH 8 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
ETH 5 - - - Unlimited
ETH 6 - - - Unlimited
ETH 7 - - - Unlimited
ETH 8 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By rroca, 19 May, 2024

provision

Output
Terminal output of remote execution
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 17:06:55+02:00 DST
Logout Time : 2024-05-19 17:06:55+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont add 4 sn-auth 485754438635139B omci ont-lineprole-id 12 ont-srvprofile-namedesc ""
^
% Too many parameters, the error locates at '^'

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By rroca, 19 May, 2024

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 5/19/2024, 2:51:26 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:50:57+02:00 DST
Logout Time : 2024-05-19 16:50:59+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438635139B
The required ONT does not exist

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By rroca, 19 May, 2024

provision

Output
Terminal output of remote execution
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:50:39+02:00 DST
Logout Time : 2024-05-19 16:50:40+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont add 4 sn-auth 485754438635139B omci ont-lineprole-id nt-srvprofile-namedesc""
^
% Parameter error, the error locates at '^'

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By rroca, 19 May, 2024

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 5/19/2024, 2:50:38 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:41:51+02:00 DST
Logout Time : 2024-05-19 16:41:53+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438635139B
The required ONT does not exist

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By abdelkader.ziani, 19 May, 2024

provision

Output
Terminal output of remote execution
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:41:40+02:00 DST
Logout Time : 2024-05-19 16:41:42+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont add 4 sn-auth 485754438635139B omci ont-lineprile-idont-srvprofile-namedesc""
^
% Parameter error, the error locates at '^'

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By abdelkader.ziani, 19 May, 2024

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 5/19/2024, 2:41:39 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:41:24+02:00 DST
Logout Time : 2024-05-19 16:41:25+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438635139B
The required ONT does not exist

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By abdelkader.ziani, 19 May, 2024

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 5/19/2024, 2:41:23 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:41:00+02:00 DST
Logout Time : 2024-05-19 16:41:02+02:00 DST
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo interactive
Interactive function is disabled

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont info by-sn 485754438635139B
The required ONT does not exist

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By abdelkader.ziani, 19 May, 2024

unprovision

Output
Terminal output of remote execution
Action: unprovision at 5/19/2024, 2:41:00 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-19 16:40:37+02:00 DST
Logout Time : 2024-05-19 16:40:38+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/4 ont
{ ont-list<S><Length 1-255>|ontid<U><0,127> }:

Command:
undo service-port port 0/0/4 ont
^
% Incomplete command, the error locates at '^'

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 4 all<K>|ontid<U><0,127> }:quit

Command:
ont delete 4 quit
^
% Parameter error, the error locates at '^'

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#

OLTErro#
retCode
0
By abdelkader.ziani, 19 May, 2024

provision

Output
Terminal output of remote execution
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2024-05-15 16:36:09+02:00 DST
Logout Time : 2024-05-15 16:36:11+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo smart
Interactive function is disabled

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont add 4 sn-auth 485754438635139B omci ont-lineprole-id nt-srvprofile-namedesc""
^
% Parameter error, the error locates at '^'

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0