Skip to main content
Home

Navegación principal

  • Home
  • Support
    • User's guide
    • Code & Development
OpenID Connect login

Breadcrumb

  1. Home
  2. Node
By abdelkader.ziani, 27 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/27/2025, 1:00:30 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 14:00:12+01:00
Logout Time : 2025-02-27 14:00:15+01:00
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/12 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/12 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 4
The number of total service virtual port which have been deleted: 4

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 12 6
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By abdelkader.ziani, 27 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/27/2025, 12:55:15 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 13:54:38+01:00
Logout Time : 2025-02-27 13:54:39+01:00
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/12 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/12 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 4
The number of total service virtual port which have been deleted: 4

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 12 6
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By patxi.eslava, 27 February, 2025

wanInfo

Output
Terminal output of remote execution
Action: wanInfo at 2/27/2025, 12:54:37 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 13:53:26+01:00
Logout Time : 2025-02-27 13:53:27+01:00
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 12 6
---------------------------------------------------------------------
F/S/P : 0/0/12
ONT ID : 6
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.170
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 082F-E961-6519
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By patxi.eslava, 27 February, 2025

wanInfo

Output
Terminal output of remote execution
Action: wanInfo at 2/27/2025, 12:53:25 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 13:42:53+01:00
Logout Time : 2025-02-27 13:43:04+01:00
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 12 6
---------------------------------------------------------------------
F/S/P : 0/0/12
ONT ID : 6
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.170
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 082F-E961-6519
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By admin.sisnet, 25 February, 2025

egllor-snmgl11

By xabier.garmendia, 25 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/25/2025, 9:20:46 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-25 09:13:20+01:00
Logout Time : 2025-02-25 09:13:21+01:00
-----------------------------------------------------------------------------

OLTZumaia>undo undo interactive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/2/3 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/2/3 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist

OLTZumaia(config)#interface gpon 0/2

OLTZumaia(config-if-gpon-0/2)#ont delete 3 6
Failure: The ONT does not exist

OLTZumaia(config-if-gpon-0/2)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255
By xabier.garmendia, 25 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/25/2025, 9:19:48 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-25 09:11:16+01:00
Logout Time : 2025-02-25 09:11:17+01:00
-----------------------------------------------------------------------------

OLTZumaia>undo

OLTZumaia>undo interactive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/2/3 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/2/3 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist

OLTZumaia(config)#interface gpon 0/2

OLTZumaia(config-if-gpon-0/2)#ont delete 3 6
Failure: The ONT does not exist

OLTZumaia(config-if-gpon-0/2)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255
By xabier.garmendia, 25 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/25/2025, 9:17:44 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-25 09:09:45+01:00
Logout Time : 2025-02-25 09:09:46+01:00
-----------------------------------------------------------------------------

OLTZumaia>undo

OLTZumaia>undo interactive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/2/3 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/2/3 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist

OLTZumaia(config)#interface gpon 0/2

OLTZumaia(config-if-gpon-0/2)#ont delete 3 6
Failure: The ONT does not exist

OLTZumaia(config-if-gpon-0/2)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255
By xabier.garmendia, 25 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/25/2025, 9:16:13 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-25 09:09:19+01:00
Logout Time : 2025-02-25 09:09:21+01:00
-----------------------------------------------------------------------------

OLTZumaia>undo undo interactive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/2/3 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/2/3 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
Failure: The ONT does not exist

OLTZumaia(config)#interface gpon 0/2

OLTZumaia(config-if-gpon-0/2)#ont delete 3 6
Failure: The ONT does not exist

OLTZumaia(config-if-gpon-0/2)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255
By xabier.garmendia, 25 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/25/2025, 9:15:47 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-24 06:41:38+01:00
Logout Time : 2025-02-24 06:41:39+01:00
-----------------------------------------------------------------------------

OLTZumaia>undo

OLTZumaia>undo interactive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/2/3 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/2/3 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTZumaia(config)#interface gpon 0/2

OLTZumaia(config-if-gpon-0/2)#ont delete 3 6
Number of ONTs that can be deleted: 1, success: 1

OLTZumaia(config-if-gpon-0/2)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255

Pagination

  • First page
  • Previous page
  • …
  • Page 13
  • Page 14
  • Page 15
  • Page 16
  • Current page 17
  • Page 18
  • Page 19
  • Page 20
  • Page 21
  • …
  • Next page
  • Last page
Canal RSS
Powered by Drupal