Skip to main content
Home

Navegación principal

  • Home
  • Support
    • User's guide
    • Code & Development
OpenID Connect login

Breadcrumb

  1. Home
  2. Node
By xavier.caballe, 3 March, 2025

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 3/3/2025, 11:44:43 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 26-02-2025 16:41:00+01:00
Logout Time : 26-02-2025 16:41:04+01:00
-----------------------------------------------------------------------------

OLTRibera_Ebre>scroll 512

OLTRibera_Ebre>undo interactive
Interactive function is disabled

OLTRibera_Ebre>undo smart
Interactive function is disabled

OLTRibera_Ebre>enable

OLTRibera_Ebre#config

OLTRibera_Ebre(config)#display ont info by-sn 4857544396C83DAC
-----------------------------------------------------------------------------
F/S/P : 0/7/1
ONT-ID : 0
Control flag : active
Run state : online
Config state : normal
Match state : mismatch
DBA type : SR
ONT distance(m) : 1000
ONT last distance(m) : 1000
ONT battery state : not support
Memory occupation : 48%
CPU occupation : 1%
Temperature : 60(C)
Authentic type : SN-auth
SN : 4857544396C83DAC (HWTC-96C83DAC)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : 10.2.65.201/19
Description : devId/12879 dropId/
5110
Last down cause : dying-gasp
Last up time : 03-03-2025 12:08:57+01:00
Last down time : 03-03-2025 12:08:02+01:00
Last dying gasp time : 03-03-2025 12:08:02+01:00
ONT online duration : 0 day(s), 0 hour(s), 35 minute(s), 0 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
VS-ID : 0
VS name : admin-vs
Global ONT-ID : 0
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 15
Line profile name : ebrecom-qinq-full
-----------------------------------------------------------------------------
FEC upstream switch :Enable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Enable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 1> DBA Profile-ID:30
<Gem Index 1>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 103 - - - - - -
--------------------------------------------------------------------
<T-CONT 2> DBA Profile-ID:20
<Gem Index 2>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 51 - - - - - -
--------------------------------------------------------------------
<T-CONT 3> DBA Profile-ID:10
<Gem Index 3>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:on |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 50 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 1
Service profile name : EG8M8145X6
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS 1 -
ETH 4 -
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 1 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : IGMP-Snooping
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Transparent - - - - - - -
ETH 2 Transparent - - - - - - -
ETH 3 Transparent - - - - - - -
ETH 4 Transparent - - - - - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
TR069 server profile ID : 10
TR069 server profile name : ACS-GRETA
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
The number of required ONTs : 1
-----------------------------------------------------------------------------

OLTRibera_Ebre(config)#quit

OLTRibera_Ebre#quit

Configuration console exit, please retry to log on
retCode
255
By xavier.caballe, 3 March, 2025

Asco-crrrr43

By inigo.berastegi, 28 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/28/2025, 1:52:35 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-28 12:56:26+01:00
Logout Time : 2025-02-28 12:56:28+01:00
-----------------------------------------------------------------------------

OLTZumaia>undointeractive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/2/15 ont 3
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/2/15 ont 3
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTZumaia(config)#interface gpon 0/2

OLTZumaia(config-if-gpon-0/2)#ont delete 15 3
Number of ONTs that can be deleted: 1, success: 1

OLTZumaia(config-if-gpon-0/2)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255
By abdelkader.ziani, 28 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/28/2025, 1:02:56 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-02-25 09:14:18+01:00
Logout Time : 2025-02-25 09:14:19+01:00
-----------------------------------------------------------------------------

OLTZumaia>undo interactive
Interactive function is disabled

OLTZumaia>enable

OLTZumaia#config

OLTZumaia(config)#undo service-port port 0/1/7 ont 2
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/1/7 ont 2
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTZumaia(config)#interface gpon 0/1

OLTZumaia(config-if-gpon-0/1)#ont delete 7 2
Number of ONTs that can be deleted: 1, success: 1

OLTZumaia(config-if-gpon-0/1)#quit

OLTZumaia(config)#quit

OLTZumaia#quit

Configuration console exit, please retry to log on
retCode
255
By admin.sisnet, 28 February, 2025

UHARKL-cllstcn

By abdelkader.ziani, 27 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/27/2025, 1:00:30 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 14:00:12+01:00
Logout Time : 2025-02-27 14:00:15+01:00
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/12 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/12 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 4
The number of total service virtual port which have been deleted: 4

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 12 6
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By abdelkader.ziani, 27 February, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 2/27/2025, 12:55:15 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 13:54:38+01:00
Logout Time : 2025-02-27 13:54:39+01:00
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/12 ont 6
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/12 ont 6
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 4
The number of total service virtual port which have been deleted: 4

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 12 6
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By patxi.eslava, 27 February, 2025

wanInfo

Output
Terminal output of remote execution
Action: wanInfo at 2/27/2025, 12:54:37 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 13:53:26+01:00
Logout Time : 2025-02-27 13:53:27+01:00
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 12 6
---------------------------------------------------------------------
F/S/P : 0/0/12
ONT ID : 6
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.170
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 082F-E961-6519
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By patxi.eslava, 27 February, 2025

wanInfo

Output
Terminal output of remote execution
Action: wanInfo at 2/27/2025, 12:53:25 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-02-27 13:42:53+01:00
Logout Time : 2025-02-27 13:43:04+01:00
-----------------------------------------------------------------------------

OLTErro>scroll 512

OLTErro>undo smart
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#display ont wan-info 0/0 12 6
---------------------------------------------------------------------
F/S/P : 0/0/12
ONT ID : 6
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.3.106.170
Subnet mask : 255.255.254.0
Default gateway : 10.3.106.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 082F-E961-6519
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

OLTErro(config)#quit

OLTErro#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By admin.sisnet, 25 February, 2025

egllor-snmgl11

Pagination

  • First page
  • Previous page
  • …
  • Page 21
  • Page 22
  • Page 23
  • Page 24
  • Current page 25
  • Page 26
  • Page 27
  • Page 28
  • Page 29
  • …
  • Next page
  • Last page
Canal RSS
Powered by Drupal