Skip to main content
Home

Navegación principal

  • Home
  • Support
    • User's guide
    • Code & Development
OpenID Connect login

Breadcrumb

  1. Home
  2. Node
By carles.casanova, 4 September, 2025

pntls-plçdlspns3

By xavier.caballe, 4 September, 2025

Asco-cmlns2

By admin.sisnet, 4 September, 2025

ilzrb-cllsnstbn

By xabier.garmendia, 4 September, 2025

Zm-snpdr41zk

By patxi.eslava, 3 September, 2025

wanInfo

Output
Terminal output of remote execution
Action: wanInfo at 9/3/2025, 11:20:11 AM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2019. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 2025-08-29 16:01:37+08:00
Logout Time : 2025-08-29 16:01:39+08:00
-----------------------------------------------------------------------------

MA5800-X7-ORKOYEN>scroll 512

MA5800-X7-ORKOYEN>undo smart
Interactive function is disabled

MA5800-X7-ORKOYEN>enable

MA5800-X7-ORKOYEN#config

MA5800-X7-ORKOYEN(config)#display ont wan-info 0/1 3 6
---------------------------------------------------------------------
F/S/P : 0/1/3
ONT ID : 6
---------------------------------------------------------------------
Index : 1
Name : OLT_C_1_TR069_R_VID_103
Service type : Tr069
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.2.234.95
Subnet mask : 255.255.252.0
Default gateway : 10.2.232.1
Manage VLAN : 103
Manage priority : 6
Multicast VLAN : -
NAT switch : Disable
Option60 : Yes
Switch : Enable
MAC address : 8886-038B-F80F
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 2
Name : 2_INTERNET_R_VID_6
Service type : Internet
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : PPPoE
IPv4 address : 100.64.49.110
Subnet mask : 255.255.255.255
Default gateway : 10.255.100.49
Manage VLAN : 6
Manage priority : 4
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8886-038B-F810
Priority policy : Specified
L2 encap-type : PPPoE
IPv4 switch : Enable
IPv6 switch : Enable
Prefix : -
Prefix access mode : PrefixDelegation
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Disconnected
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : None
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Off
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 3
Name : 3_VOIP_R_VID_3
Service type : Voip
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 100.96.49.97
Subnet mask : 255.255.255.0
Default gateway : 100.96.49.1
Manage VLAN : 3
Manage priority : 7
Multicast VLAN : -
NAT switch : Enable
Option60 : No
Switch : Enable
MAC address : 8886-038B-F811
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------
Index : 4
Name : 4_OTHER_R_VID_22
Service type : Other
Connection type : IP routed
IPv4 Connection status : Connected
IPv4 access type : DHCP
IPv4 address : 10.128.49.102
Subnet mask : 255.255.255.0
Default gateway : 10.128.49.1
Manage VLAN : 22
Manage priority : 2
Multicast VLAN : -
NAT switch : Disable
Option60 : No
Switch : Enable
MAC address : 8886-038B-F812
Priority policy : Specified
L2 encap-type : IPoE
IPv4 switch : Enable
IPv6 switch : Disable
Prefix : -
Prefix access mode : Invalid
Prefix preferred time : -
Prefix valid time : -
IPv6 Connection status : Invalid
IPv6 address : -
IPv6 address status : Invalid
IPv6 address access mode : Invalid
IPv6 address preferred time: -
IPv6 address valid time : -
DS-Lite Mode : Invalid
DS-Lite peer address : -
---------------------------------------------------------------------

MA5800-X7-ORKOYEN(config)#quit

MA5800-X7-ORKOYEN#quit
Check whether system data has been changed. Please save data before logout.
Are you sure to log out? (y/n)[n]:y

Configuration console exit, please retry to log on
retCode
255
By xavier.caballe, 2 September, 2025

serialInfo

Output
Terminal output of remote execution
Action: serialInfo at 9/2/2025, 7:23:50 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 02-09-2025 21:22:11+02:00 DST
Logout Time : 02-09-2025 21:22:14+02:00 DST
-----------------------------------------------------------------------------

OLTRibera_Ebre>scroll 512

OLTRibera_Ebre>undo interactive
Interactive function is disabled

OLTRibera_Ebre>undo smart
Interactive function is disabled

OLTRibera_Ebre>enable

OLTRibera_Ebre#config

OLTRibera_Ebre(config)#display ont info by-sn 485754438698D99B
The required ONT does not exist

OLTRibera_Ebre(config)#quit

OLTRibera_Ebre#quit

Configuration console exit, please retry to log on
retCode
255
By xavier.caballe, 2 September, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 9/2/2025, 7:23:12 PM


Huawei Integrated Access Software (MA5800).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 10.228.153.11
Login Time : 01-09-2025 13:17:57+02:00 DST
Logout Time : 01-09-2025 13:17:58+02:00 DST
-----------------------------------------------------------------------------

OLTRibera_Ebre>undo interactive
Interactive function is disabled

OLTRibera_Ebre>enable

OLTRibera_Ebre#config

OLTRibera_Ebre(config)#undo service-port port 0/6/1 ont 13
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/6/1 ont 13
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTRibera_Ebre(config)#interface gpon 0/6

OLTRibera_Ebre(config-if-gpon-0/6)#ont delete 1 13
Number of ONTs that can be deleted: 1, success: 1

OLTRibera_Ebre(config-if-gpon-0/6)#quit

OLTRibera_Ebre(config)#quit

OLTRibera_Ebre#quit

Configuration console exit, please retry to log on
retCode
255
By xavier.caballe, 2 September, 2025

Asco-crrrmlns2

By rroca, 1 September, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 9/1/2025, 3:29:05 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-09-01 17:18:57+02:00 DST
Logout Time : 2025-09-01 17:19:05+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/6 ont 12
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/6 ont 12
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 5%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 6 12
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0
By rroca, 1 September, 2025

unprovision

Output
Terminal output of remote execution
Action: unprovision at 9/1/2025, 3:17:23 PM
spawn telnet 10.3.106.2
Trying 10.3.106.2...
Connected to 10.3.106.2.
Escape character is '^]'.

Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet.

>>User name:network
>>User password:


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2017. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : Telnet
IP-Address : 10.228.153.11
Login Time : 2025-09-01 17:16:04+02:00 DST
Logout Time : 2025-09-01 17:16:12+02:00 DST
-----------------------------------------------------------------------------

OLTErro>undo interactive
Interactive function is disabled

OLTErro>enable

OLTErro#config

OLTErro(config)#undo service-port port 0/0/6 ont 12
{ <cr>|gemport<K> }:

Command:
undo service-port port 0/0/6 ont 12
Warning: The operation will delete multiple or all service ports and cause
interruptions of many user services.
Service virtual ports on the ONT are being deleted, please wait: 100%
The number of total service virtual port which need be deleted: 3
The number of total service virtual port which have been deleted: 3

OLTErro(config)#interface gpon 0/0

OLTErro(config-if-gpon-0/0)#ont delete 6 12
Number of ONTs that can be deleted: 1, success: 1

OLTErro(config-if-gpon-0/0)#quit

OLTErro(config)#quit

OLTErro#quit

OLTErro#

Configuration console exit, please retry to log on
Connection closed by foreign host.
retCode
0

Pagination

  • First page
  • Previous page
  • …
  • Page 24
  • Page 25
  • Page 26
  • Page 27
  • Current page 28
  • Page 29
  • Page 30
  • Page 31
  • Page 32
  • …
  • Next page
  • Last page
Canal RSS
Powered by Drupal